Fluke FLUKE-368FC Leakage Current Clamp Meter

Features:

• True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
• 40 mm jaw opening
• Highest resolution of 1 μA, measure up to 60 A
• Selectable filter function removes unwanted noise
• Max/Min/Average readings and hold function
• Forward-facing LED worklight for use in dark wiring cabinets
• Backlit display; auto backlight off and auto power off for extended battery life
• CAT III 600V safety rating
• Internal Memory Logging: up to 65,000 measurement points

Specifications:

• Measurement function: Alternating current
• AC ampere range:
• 3 mA, 30 mA, 300 mA, 3 A, 30 A, 60 A
• mA / A: manual selection
• 3 mA / 30 mA / 300 mA: automatic selection
• 3 A / 30 A / 60 A: automatic selection
• Range / Resolution:
• 3 mA¹ / 0.001 mA
• 30 mA / 0.01 mA
• 300 mA / 0.1 mA
• 3 A / 0.001 A
• 30 A / 0.01 A
• 60 A / 0.1 A
• Accuracy – filter activated (40 to 70 Hz), filter off (40 to 1 kHz)²:
• 3 mA – 30 A ; 1% + 5 digits
• 60 A ; 2% + 5 digits
• Frequency: 40 Hz to 1 kHz
• Crest Factor: 3
• After calibration accuracy is valid for one year. Accuracy is expressed as ± (% of reading + digits). Reference conditions 23 ±5 °C and a maximum relative humidity of 80%.
  ¹The minimum value is 10 μA rms.
  ²Outside of the TC / °C 18 °C to 28 °C, 0.02 + 1
• Display (LCD): Digital readout: 3300 count
• Display refresh rate: 4 times / sec
• Maximum conductor diameter: 40 mm
• Dimensions: 234 x 101 x 46 mm
• Weight: 500 g
• Battery: 2 AA, IEC LR6, NEDA 15A, alkaline
• Battery life: Expected battery life, without using backlight and spotlight, is more than 150 hours
• Automatic shut-down: Meter automatically shuts down after 15 minutes of inactivity
• General safety: IEC 61010-1: Pollution Degree 2
• Measurement safety: IEC 61010-2-032: CAT III 600 V / CAT IV 300 V
• Operating temperature: -10 °C to +50 °C
• Storage temperature: -40 °C to +60 °C
• Operating humidity Non-condensing: (<10 °C)
• 90% relative humidity: (10 °C to 30 °C)
• 75% relative humidity: (30 °C to 40 °C)
• 45% relative humidity: (40 °C to 50 °C)
• Protection class: IEC 60529: IP30 (jaw closed)
• Operating altitude: 2000 m
• Storage altitude: 12000 m
• Current sensor action category: IEC 61557-13: Class 2, ≤30 A / m
• Electromagnetic compatibility (EMC)
• International
• IEC 61326-1 Industrial Electromagnetic Environment
• CISPR 11 Group 1 Class B
• Group 1 Generated inside the equipment and / or use radio frequency energy associated with conducting the energy for the device's own internal functions is essential.
• Class B
• Equipment for home appliances and residential buildings directly connected to a low voltage power supply network equipment. When this device is connected to a test object, it may exceed the emission levels produced by CISPR 11 requirements.
• Korea (KCC): A type of equipment (radio and communication equipment industry)
• Class A
• This product meets the requirements of industrial electromagnetic equipment, vendors or users should be aware of this. This device is intended for use in a commercial environment, instead of the home environment.
• USA (FCC): 47 CFR 15 B Subpart. In accordance with section 15.103 provides that the products are considered tax-free device.

Includes:

• Leakage Clamp Meter
• Soft case
• Safety manual
• Batteries: 2 AA