Fluke FLUKE-6500-2 AU Portable Appliance Tester

Features:

• Dedicated key for each test for ‘one-touch’ testing
• Pre-set pass/fail levels to save time
• Large backlit display for easy reading
• Single mains socket for appliance connection
• Separate IEC socket for easy mains/extension lead testing
• Detachable test leads for quick field replacement
• Integral carrying handle
• USB port for data transfer
• Integral QWERTY keyboard for rapid data entry
• Additional USB memory capability for back-up data storage and transfer to PC
• Large backlit graphics display
• Pre-set, auto-test sequences for user convenience
• Integral site, location and description codes for faster data processing
• Memory review facility for more on-site control
• USB port for data transfer

Specifications:

• Test specifications
• The accuracy specification for the display range is defined as ±(%reading + digit counts) at 23 °C ±5 °C, ≤75% RH.
• Between 0 °C and 18 °C and between 28 °C and 40 °C, accuracy specifications may degrade by 0.1 x (accuracy specification) per °C.
• The measurement range meets the service operating errors specified in EN61557-1: 1997, EN61557-2: 1997, EN61557-4: 1997, EN61557-6: 1997, DIN VDE0404-2.
• Power-on test- The test indicates reversed L-N, missing PE, and measures the mains voltage and frequency.
• Display range: 90 V to 264 V
• Accuracy: at 50 Hz ±(2% + 3 counts)
• Resolution: 0.1 V
• Input impedance: > 1 MΩ // 2.2 nF
• Maximum input mains voltage: 264 V
• Earth bond test (Rpe)
• Display Range: 0 to 19.99 Ω
• Accuracy (after bond test zeroing): ±(5% + 4 counts)
• Resolution: 0.01 Ω
• Test current:
• 200 mA AC -0% +40% into 1.99 Ω
• 10 A AC ±20% into 25 mΩ at 230 V
• Open circuit voltage: > 4 V AC, < 24 V AC
• Bond test zeroing can subtract: up to 1.99 Ω
• Insulation test (Riso)
• Display range: 0 to 299 MΩ
• Accuracy: ±(5% + 2 counts) from 0.1 to 300 MΩ
• Resolution:
• 0.01 MΩ (0 to 19.99 MΩ)
• 0.1 MΩ (20 to 199.9 MΩ)
• 1 MΩ (200 to 299 MΩ)
• Test voltage: 500 V DC -0% + 25% at 500 kΩ load or 250 V dc -0% +25% at 250 kΩ load
• Test current: > 1 mA at 500 kΩ load, < 15 mA at 0 Ω
• Auto discharge time: < 0.5 s for 1 μF
• Max. capacitive load: Operational up to 1 μF
• Touch current test
• Display range: 0 to 1.99 mA AC
• Accuracy: ±(4% + 2 counts)
• Resolution: 0.01 mA
• Internal resistance (via probe): 2 kΩ
• Measuring method: Probe*
• Substitute leakage current test
• Display range: 0 to 19.99 mA AC
• Accuracy: ±(2.5% + 3 counts)
• Resolution: 0.01 mA
• Test Voltage: 100 V AC ±20%
• Load/leakage test: load current
• Display range: 0 A to 13 A
• Accuracy: ±(4% + 2 counts)
• Resolution: 0.1 A*
• Load/leakage test: load power
• Display range: 230 V Mains 0.0 VA to 3.2 kVA
• Accuracy: ±(5% + 3 counts)
• Resolution: 1 VA (0 to 999 VA), 0.1 kVA (>1.0 kVA)*
• Load/leakage test: leakage current
• Display range: 0 to 19.99 mA
• Accuracy: ±(4% + 4 counts)
• Resolution: 0.01 mA*
• PELV test
• Accuracy: at 50 Hz ±(2% + 3 counts)
• Overload protection: 300 V rms
• Warning threshold: 25 V rms
• RCD test: trip current
• Operational error: ±10%
• Nominal: 30 mA
• Accuracy: ±5%
• RCD test: trip time
• Standard requirement: 61557 Part 6; tolerance of rated test current 0% to +10%
• Operational error: ±10%
• RCD type: AC general-purpose 30 mA
• Display range: 310 ms
• Resolution: 0.1 ms
• Accuracy: 3 ms
• Trip time limit at 100% (30 mA): 300 ms
• Trip time limit at 500% (150 mA): 40 ms

*The appliance under test is energized at mains potential.

• Operating temperature: 0 to 40 °C
• Relative humidity
• Non condensing <10 °C
• 95% from 10 to 30 °C
• 75% from 30 to 40 °C
• Safety rating
• Complies with EN61010-1 3rd edition
• CAT II, 300 V, pol 2
• Size (L x W x H) 200 x 275 x 114 mm
• Weight 3.13 kg
• Power supply: 230 V +10% -15%, 50 Hz ±2 Hz or (6500-2 only: 110V +10% -15%,50 Hz ±2 Hz)
• Power consumption (tester)
• 13 W typical (idle)
• 60 W max. during 25A Bond test
• Storage
• Temperature: -10 to 60 °C
• Corrosion: 70 °C @ 95% RH for 5 days max.
• Operating altitude: 0 up to 2000 m
• Sealing: IP-40 (enclosure), IP-20 (connectors)
• EMC: Complies with EN61326-1, portable
• EMI: Immunity 3 V/m

Includes:

• Fluke 6500-2 Portable Appliance Tester
• User's manual on CD
• Quick reference guide
• Hard carrying case
• Test lead
• Test probe
• Crocodile clip
• Mains cord
• USB stick
• USB cable